phn +64 9 424 2278
 

01421

Sonel MRU-200 Earth Resistance and Resistivity Tester - CATIV

Sonel MRU-200 Earth Resistance and Resistivity Tester - CATIV
larger imageMove mouse over the image to magnify
MRU-200 is the only meter in the market which uses all measurement methods.
Possible measurements:
  • earth resistance measurment with 2-pole, 3-pole,4-pole method,
  • impulse earth impedance measurement, two kinds of measuring impulse 4/10μs, 10/350μs,
  • earth resistance measurement without disconnecting measured earths (using clamp),
  • two clamps earth resistance measurement without auxiliary test probs,
  • earth resistivity measurement,
  • continuity measurement,
  • leakage current measurement.

    It allows to take the measurements of:

  • earth resistance using auxiliary electrodes,
  • earth resistance using auxiliary electrodes and clamp (for measurements of multiple earthing)
  • earth resistance using double clamps (for measurement of earthing when it is impossible to use auxiliary electrodes),
  • impulse earth impedance (without disconnecting measured earthing),
  • ground resistivity (Wenner method),
  • current using the clamp (e.g. leakage) and flexible clamp (Rogowsky coil),
  • measurement of continuity of equipotential bondings and protective conductors (meeting the requirements of IEC 60364 - 6 - 61:2000 section 6.12.2) with auto-zero function – with current 200 mA.
  • Additionally:

  • measurement of resistance of auxiliary electrodes RS and RH,
  • measurement of interference voltage,
  • measurement of interference frequency,
  • measurement in the presence of interference voltage in the power network
    with frequency 16 2/3 Hz, 50 Hz, 60 Hz and 400 Hz (with automatic selection of proper frequency of measuring signal or with manual selection),
  • selection of maximum measuring voltage (25 V and 50 V)
  • introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
  • memory of 990 measurements (10 banks of 99 cells each),
  • calibration of clamp used,
  • real time clock (RTC),
  • data transmission to the computer (USB),
  • indication of battery state.
  • Electric security:

  • type of insulation: double, according to EN 61010 - 1 and IEC 61557
  • measurement category: CAT IV 300 V acc. to EN 61010 - 1
  • protection class acc. to EN 60529: IP54
  • Rated operational conditions:

  • operation temperature: -10...+50°C
  • storage temperature: -20...+70°C
  • humidity: 20...80%
  • Other technical data:

  • LCD display: graphic, backlighted
  • interface: USB
  • number of measurements carried out of set of batteries: > 1200
  • warranty: 24 month                                                                                                                              
  •  pdficon small​ View Data Sheet
Enquire

You might also be interested in ...

Sonel MPI-530 Multifunction Tester - CATIV

Sonel MPI-530 Multifunction Tester - CATIV

MPI-530 is a multi-functional instrument for electric shock protection measurements including various methods for measuring earthing and earthing resistance.
Enquire
Sonel MRU-30 Earth Resistance and Resistivity Tester CatIII

Sonel MRU-30 Earth Resistance and Resistivity Tester CatIII

The Sonel MRU-30 uses most known methods of earth resistance measurements and is IP65 Rated
Enquire

About Us

We have over 25 years experience in importing and distributing technical products. At Pro-Test Instruments we understand the importance of providing quality technical advice and service to ensure you get the best product for the application and maximises the return on your investment.
 
 

Sign up for our Newsletter

We periodically email our clients with a newsletter outlining latest developments in our products and services. If you would like to receive this information please follow the link below

Sign Up
 

Contact Us

phn1 +64 9 424 2278