phn +64 9 424 2278
 

01466

SMC Raptor Primary Injection Test System

SMC Raptor Primary Injection Test System
larger imageMove mouse over the image to magnify
High Power, Lightweight Primary Injection Test Set

The Raptor system consists of a main ‘master’ unit and a number of optional units that enable the  execution of virtually any commissioning or routine testing jobs on the primary equipment of medium and high voltage electricity installations. Massive use of digital technology and innovative design turn the Raptor system into the most portable primary test set available, at a very attractive price.

The simplest Raptor configuration gathers a comprehensive set of resources and test functions in an ultra compact, remarkably portable 77-lb (35 kg) body: master unit, detachable touch-screen console, voltage and current measurement inputs, dual voltage / current test source, binary input, and a 3-kVA digital amplifier for a maximum 9,500 A current injection with variable frequency. A large diversity of test jobs can be accomplished, including circuit breaker and re-closer testing, ground grid integrity verification, transformer saturation analysis, burden and ratio measurement, and more.

For high current applications, the Raptor implements the ‘pass-through secondary’ technique, with a centered hole that confers to this product a unique personality. You only need to drive the current conductor through the Raptor and attach both ends to the device under test. Multiple cables can be used in parallel to increase the effective cross section, and the compliance voltage can be easily multiplied by just doing multiple turns around the unit. If additional power is required, 5-kVA slave units can be added for up to a total 18 kVA and a maximum 15,000 A injection. These units communicate with the master Raptor via an infrared link, so no physical interconnections are required. An integrated software calculator allows determining the equipment and cabling required to attain a specific amount of current easily.

Tests requiring a moderately high AC voltage up to 2,000 V can be accomplished by adding the Raptor HV to the system. These jobs include power transformer evaluation, voltage withstand / isolation tests, and step & touch voltage measurement, among others. The Raptor HV is visually similar to the other Raptor units but lacks the characteristic center hole in the current injection models.

No matter the combination of master and optional units used, the entire Raptor system is controlled as a single device from the control console in the master unit. This small command center features a magnetic rear face and implements a comprehensive collection of pre-configured tests that can be customized and extended by the user. Custom settings and test results are permanently stored for subsequent download from a PC via a standard USB port. The Raptor console can be directly updated over the Internet via its built-in RJ-45 Ethernet® LAN connection.

The Raptor is a stabilized injection system, i.e. it will compensate small supply and load variations automatically to guarantee the test values throughout the entire job’s duration. Its compact and robust design enables the use by a single person, and its modular concept avoids the need of investing in unnecessary features or carrying equipment that you will not need.

CHARACTERISTICS

  • Compact and lightweight.
  • Integral wheels and handle.
  • Dynamic output stabilization.
  • Multi-functionality.
  • Expandability.
  • Convenient and efficient pass-through technique.
  • Pre-configured tests
  • Test & results storage, download and reporting
  • Internet connection
Enquire

You might also be interested in ...

FLIR CM55 & CM57 Flexible Clamp Meters

FLIR CM55 & CM57 Flexible Clamp Meters

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools mobile app, quickly share and analyze data right from the jobsite.
Enquire
DV-Power CAT-II Series Circuit Breaker Analysers

DV-Power CAT-II Series Circuit Breaker Analysers

Circuit Breaker Analyzer & Timer (CAT) series are standalone or PC controlled digital instruments for circuit breakers’ condition assessment. They enable simultaneous measurements of up to 12 main contacts (4 breaks per a phase) including pre-insertion resistors and 6 auxiliary contacts.
Enquire
NDB Tech PD-LT Cable Termination PD Detector

NDB Tech PD-LT Cable Termination PD Detector

The PD-LT allows online partial discharge detection on cable accessories such as cable head for safety and maintenance purposes. The partial discharge level is displayed on the built-in audible and visual indicators, and on the remote display.
Enquire
Flir Ex-XT Series Thermal Imaging Cameras

Flir Ex-XT Series Thermal Imaging Cameras

FLIR E4, E5-XT, E6-XT and E8-XT infrared cameras. Compact, lightweight thermal imaging cameras can be used for all infrared applications including electrical/mechanical/building inspection etc. Infrared Sensor resolutions from 80 x 60 to 320 x 240 pixels, -20° to 250°C temperature range.
Enquire

About Us

We have over 25 years experience in importing and distributing technical products. At Pro-Test Instruments we understand the importance of providing quality technical advice and service to ensure you get the best product for the application and maximises the return on your investment.
 
 

Sign up for our Newsletter

We periodically email our clients with a newsletter outlining latest developments in our products and services. If you would like to receive this information please follow the link below

Sign Up
 

Contact Us

phn1 +64 9 424 2278
f1   
Linkedin-404
We accept all major credit cards
 smallvisa  smallmc