Home T&M Products Microohmmeters

DV-Power RMO-G series Micro Ohmmeters

  •  RMO100G – test current from 5 to 100 A, weighs only 8 kg / 17.6 lbs
       RMO200G – test current from 5 to 200 A, weighs only 8 kg / 17.6 lbs
       RMO300G – test current from 5 to 300 A, weighs only 8 kg / 17.6 lbs
       RMO400G – test current from 5 to 400 A, weighs only 9 kg / 20 lbs
       RMO500G – test current from 5 to 500 A, weighs only 9 kg / 20 lbs
       RMO600G – test current from 5 to 600 A, weighs only 11 kg / 24.3 lbs
       RMO800G – test current from 5 to 800 A, weighs only 11,5 kg / 25.4 lb
  • Measuring range: 0,1 μΩ – *999,9 mΩ (*499,9 mΩ for RMO800G)
  • Resolution: 0,1 μΩ
  • Typical accuracy: ± (0,1 % rdg + 0,1 % FS)
  • Remote Control Unit (optional)
  • Both Sides Grounded Unit (optional)
  • SINGLE / CONTIN / BSG / DTRtest modes

RMO-G series of Micro Ohmmeters (hereafter referred to as “RMO-G”) is based on a state of the art technology, using the most advanced switch mode technique available today.RMO-G generates a true DC ripple-free current with automatically regulated test ramps. During a test the RMO-G ramps with increasing current before measuring and decreasing current after the measurement. This eliminates magnetic transients.

The RMO-G instrument can store internally up to 500 measurements. All measurements are time and date stamped. Using the DV-Win software a test can be performed from a user’s PC, and the results can be obtained directly on the PC. Communication between the RMO-G and a PC is through an USB (as standard) or an RS232 cable (as an option). Bluetooth communication interface is also available as an option.Using the DV-Win the result can be arranged as an Excel spread-sheet which can be later shown as a diagram and printed for a report.

The set is equipped with a thermal and an overcurrent protection. The RMO-G has a very high ability to cancel electrostatic and electro-magnetic interference in HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing a proprietary hardware and software.

The RMO-G instrument has four separate test modes:

  • SINGLE mode
  • CONTIN mode
  • BSG mode (Both Sides Grounded)
  • DTRtest mode (Dead Tank Resistance)

01530

Microohmmeters

Questions?

In order to assist us in reducing spam, please type the characters you see:
spam control image

You may also like